...take a look here:
StVZO Beleuchtung und TA Bestimmungen. The page refers to the "TA" rulings, which are the "technical requirements" guidelines which tell you how to test the stuff defined by the StVZO to get the stuff approved by the "Technisches Bundesamt".
Look under "TA 23: Beleuchtungskörper" - there is a picture which shows how much or max. light (in lux at 10m) is allowed in the different quadrants...
Sorry for my German but my understanding is slightly different:
In German:- der Scheinwerfer muss so ausgerichtet werden, dass sein hellster Punkt in HV (mind. 10 lux)liegt
- entlang der Pfeillinien in, bzw. zwischen den Messpunkten (L1 bis R5) sind - Mindestbeleuchtungsstärken gefordert
in der Zone 1 darf die Lichtstärke 2 lux nicht übersteigen
in English:The headlamp must be positioned or aligned in such a way that
the brightest point in HV is minimum 10 lux.
Along the arrow lines, i.e. between the measurement points L1-R5 the illuminance must be the minimum required (i.e. 10 lux).
In Zone 1, the light intensity can not be greater than 2 lux.
Am I correct ??
abwesend
Drucken
vorhergehendes Thema
Themenübersicht
